Performance data

The figures below summarize product specifications in the latest LuxLok sealing-film catalog, together with checks for sealing, storage and automation workflows. Contact the technical team for reports on a specific plate format or product lot.

LX11031R: catalog specifications

Item	Catalog information	Selection check
Format and plates	100 μm aluminum roll film; 115 mm × 400 m; listed for PP, PE, PS, PC and COC plates	Confirm width, plate and loading method
Suggested sealing settings	150–180°C, 3–5 seconds	Establish a window on the actual plate
Vacuum and heat	−80 kPa for 15 minutes; 45°C oven for 7 days	Inspect seal and plate condition
Storage and solvents	Catalog states resistance to DMSO and other organic solvents and suitability for long-term storage at −80°C	Check leakage, evaporation and film changes with the actual sample
Cleanliness	RNase & DNase-free; non-sterile	Confirm lot documents as required

Build a performance record

Dimension	Suggested record
Seal integrity	Well seals, lifted edges, channels, leakage and plate distortion
Evaporation control	Mass or volume change with the same plate, fill volume and storage conditions
Solvent resistance	Actual solvent, concentration, contact duration and condition after peeling
Optical performance	Background signal, transmission and condensation on the intended instrument
Automation compatibility	Loading, web transport, cutting, alignment, peeling or piercing

For a product or lot report, review available documents on the downloads page or contact the technical team.